[. . . ] Patch Notes Polycom® DMATM 7000 System Patch ID #: Affected versions: Released file: 2. 0. 0_SP_3_Build_30 DMA 7000 system version 2. 0. 0 GA (2. 0. 0 Build 22), 2. 0. 0 SP 1, and 2. 0. 0 SP 2 2. 0. 0_SP_3_Build_30. upg Purpose This patch addresses the four issues described below and in the Resolved Issues table. Symptoms 1. [. . . ] Calls from federated offices to DMA conference rooms now connect to RMX MCUs without problems. System configuration changes affecting CSRs are now copied to the file used to generate CSRs. The Polycom DMA system now properly handles SIP calls without a User-Agent header. Installation Notes To update a Polycom DMA system with a new software patch, complete the following tasks: 1. Perform the software upgrade by following the upgrade steps described in the "Upgrading the Software" topic of the online help or Polycom DMA 7000 System Operations Guide. Log into the system and check the version number to verify the upgrade. © Polycom, Inc. POLYCOMTM, the Polycom "Triangles" logo and the names and marks associated with Polycom's products are trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries. 2. 0. 0_SP_3_Build_30 1 Rollback Considerations To roll back the patch, follow the rollback steps described in the "Upgrading the Software" topic of the online help or Polycom DMA 7000 System Operations Guide. Resolved Issues Issue ID DMA2209 DMA2222 DMA2292 DMA2344 Found in Version 2. 0 2. 0 2. 0 2. 0 Description Domain Name does not get into CSR on an upgraded system. [. . . ] and are registered and/or common law marks in the United States and various other countries. [. . . ]